• auger bit for wood working
  • 5-pc auger bit sets in wood box
  • 12mm wood beaver drill bit for wood working
  • 5-pc brad point wood drill bit sets
  • T.C.T. point brad point wood drill bit
  • adjustable Countersink Drill Bits for wood working

Auger Bits
Brad Point Drill Bit
HSS Drill Saw
Wood Spade Bits
Extension Rods for Spade Bits
Expansive Bits

Feature of Auger Bits:
1) Made of high carbon steel with threaded tip.
2) Screw threaded centre point for precisely locating the bit and for fast self-starting of the hole.
3) Single outer cutting spur for splinter free drilling and clean holes.
4) Wide lands keep bit straight as it bores through the hole.
5) Full length heat treatment guards against bending bit in heavy-duty applications.
6) For precise drilling in soft and hard wood, large section beam, chipboard and plywood.
7) European Style and American Style
Metric Sizes (mm):
Diameter: 6, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 28, 30, 32, 34, 35, 36, 38, 40mm
Overall Length: 100mm, 125mm, 155mm, 200mm, 230mm, 250mm, 300mm, 400mm, 460mm, 500mm, 600mm, 650mm
Fractional Sizes (Inch):
Diameter: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2"
Overall Length: 4", 5", 6", 8", 9", 10", 12", 16", 18", 20", 24", 26"

What is Auger Bits?
The cutting principles of the auger bit are the same as the other center bit. The auger adds a long deep spiral flute for effective chip removal. Two styles of auger bit are commonly used in hand braces: the Jennings or Jennings-pattern bit has a self-feeding screw tip, two spurs and two radial cutting edges. This bit has a double flute starting from the cutting edges, and extending several inches up the shank of the bit, for waste removal. This pattern of bit was developed by Russell Jennings in the mid-19th century.
The Irwin or solid-center auger bit is similar, the only difference being that one of the cutting edges has only a "vestigal flute" supporting it, which extends only about 1⁄2 in (13 mm) up the shank before ending. The other flute continues full-length up the shank for waste removal. The Irwin bit may afford greater space for waste removal, greater strength (because the design allows for a center shank of increased size within the flutes, as compared to the Jenning bits), or smaller manufacturing costs. This style of bit was invented in 1884, and the rights sold to Charles Irwin who patented and marketed this pattern the following year.
Both styles of auger bits were manufactured by several companies throughout the early- and mid-20th century, and are still available new from select sources today.
The diameter of auger bits for hand braces is commonly expressed by a single number, indicating the size in 16ths of an inch. For example, #4 is 4/16 or 1/4 in (6 mm), #6 is 6/16 or 3/8 in (9 mm), #9 is 9/16 in (14 mm), and #16 is 16/16 or 1 in (25 mm). Sets commonly consist of #4-16 or #4-10 bits.

Other Auger Bits for choosing:
SDS-plus Shank Auger Bits
Ship Auger Bits
1/4" Hex Shank Auger Bits
Two Flute Auger Bits
Carbide Tipped Auger Bits
Handle Auger Bits
Hand Brace Auger Bits
Four Flute Auger Bits ( Quad Auger Bits )
Snake Head Auger Bits


What is brad point drill bit?
The lip and spur drill bit is a variation of the twist drill bit which is optimized for drilling in wood. It is also called the brad point bit or dowelling bit.
In wood, the centre of the brad point bit is given not the straight chisel of the twist drill bit, but a spur with a sharp point and four sharp corners to cut the wood. The sharp point of the spur simply pushes into the soft wood to keep the drill bit in line.
Wood drilled across the grain has long strands of wood fiber. These long strands tend to pull out of the wood hole, rather than being cleanly cut at the hole edge. The lip and spur drill bit has the outside corner of the cutting edges leading, so that it cuts the periphery of the hole before the inner parts of the cutting edges plane off the base of the hole. By cutting the periphery first, the lip maximizes the chance that the fibers can be cut cleanly, rather than having them pull messily out of the timber.
Lip and spur drill bits are also effective in soft plastic. Conventional twist drill bits in a hand drill, where the hole axis is not maintained throughout the operation, have a tendency to smear the edges of the hole through side friction as the drill bit vibrates.
Lip and spur drill bits are ordinarily available in diameters from 3–16 mm (0.12–0.63 in).

Feature of brad point drill bit:
1. Made of high carbon steel or chrome vanadium (cv) with brad point and 2 shouldered cutting spurs.
2. Centre point enters first; prevents "skating".
3. Cutting flutes are engineered for optimum chip ejection so drill will not bind and burn out.
4. For drilling accurate, splinter-free holes in soft wood, hard wood, plywood and hardboard.
5. Use in hand drills, electric portable drills, drill presses and lathes.
6. Shank size larger than 10mm or 3/8" use reduced shank.
7. Ex-long Drill bits with 200mm, 300mm, 400mm, 600mm or 8", 12", 16" overall length are available.
8. Brad Point Drill Bits Set are available.
9.Packaging: Individual Packaging in plastic hang pouch.

Other Brad Point Drill Bits for choosing:
Stubby Bits with Quick Change Hex Shank
Carbide Tipped Brad Point Drill Bits


HSS Drill Saw, Titanium Coated
1. Drill Saw can be used as a Drill, Saw, Rotary file, Reamer and Router, which is made of High Speed Steel and Titanium Coated for extended life, HSS Drill Saw can also be used for metal drilling work.
2. Drill Saw Drills & Cuts: Wood, Wallboard, Plastic & Soft Metals.
3. Cross-milled for quick clog-free operation.
4. Fits any electric drill or drill press. cuts own starting holes and any sharp in any direction tool is moved
5. Drill Saw Set are available.


What is Wood Spade Bits?
Spade bits are used for rough boring in wood. They tend to cause splintering when they emerge from the work piece. Woodworkers avoid splintering by finishing the hole from the opposite side of the work. Spade bits are flat, with a centering point and two cutters. The cutters are often equipped with spurs in an attempt to ensure a cleaner hole. With their small shank diameters relative to their boring diameters, spade bit shanks often have flats forged or ground into them to prevent slipping in drill chucks. Some bits are equipped with long shanks and have a small hole drilled through the flat part, allowing them to be used much like a bell-hanger bits. Intended for high speed use, they are used with electric hand drills. Spade bits are also sometimes referred to as "paddle bits".
Spade drill bits are ordinarily available in diameters from 6 to 36 mm (0.24 to 1.42 in).

Specification on Wood Spade Bits(Normal Type Ground Hex Shank):
1. Standard Overall Length: 6" or 152mm, Extra-long Length are available: 12" / 300mm; 16" / 400mm; 18" / 450mm.
2. Forged in one piece from high carbon steel.
3. Machined cutting groove for fast boring and cleaner holes.
4. Long centre point for accurate hole location.
5. High visibility stamped size marking for fast and easy identification.
6. Precision ground hex shank prevents spinning in drill chuck or in bit extension.
7. Full length heat treatment guards against bending bit in heavy-duty applications.
8. For boring smooth, clean, perfectly defined holes in soft and close grained wood, chipboard and floor board.
9. Titanium Coated are available.
10. Spade Bits Set are available.

Other Spade Bits for choosing:
Spade Bits, Three Point Type Ground Hex Shank
Spade Bits, 1/4" Hex Shank
Long Spade Bits12" or 300mm Extra-length Normal Type
Long Spade Bits 16" or 400mm Extra-length Three Point Type


Extension Rods for Spade Bits Ground Hex Shank
1.Extension Rods is assembled with spade bits to drill holes in some places needing extra long spade bits.
2. Double set screws secure bit into extension.
3. Complete with 1/8" hex key wrench.
4. Universal 1/4" Quick change Hex Shank are available.


Expansive Bits
1.Expansive Bits are for drilling different sizes of big holes in wood to meet different working demands.
2.Heavy duty function is upon the best cost combination.
3.For Wood, Plywood, Chipboard.


 

For more details on Wood Working Tools, please check catalogue or contact us.